Remote Descriptions - Sony CDR-W66 Operating Instructions Manual

Location and Function of Parts

Remote Descriptions

1
6
11 12
16 17
21 22
3
5
6
7
9
!º
!¡
!™
!£
!¢
The buttons on the remote with the same display as the
front panel have the same function. This section
explains the functions of buttons that are on the remote
only.
1 SCROLL button
Use to scroll the name of a track or disc.
2 Number buttons (1–25)
Press to select a track number directly.
3 >25 button
Use to select a track number greater than 25.
4 M.SCAN (Music Scan) button
Press to start music scan.
8
!§
2 3 4 5
7 8 9 10
13 14 15
18 19 20
23 24 25
NAME IN (NAME/CHAR/NUM/Character button)
5 NAME button
Press to add the name or change the name of a track
or disc.
6 CHAR button
When entering characters using the remote, press to
select the type of characters to be input. You can
also switch between uppercase and lowercase
1
letters.
7 NUM button
When entering characters using the remote, press to
enter numbers using buttons 1 to 10. Here, button
10 enters the number 0.
2
8 Character button
When entering names, you can enter characters
using the orange display buttons. Buttons 1 to 10
8
can be used after switching between number and
alphabet inputs using the NUM and CHAR
4
buttons.
CD-SYNC (STOP/START/STANDBY)
By connecting a Sony CD player, you can make
recording easily.
The remote operates both the CD player and the CD
recorder, so install the CD player and CD recorder close
together.
9 STOP button
Press to stop CD Synchro-recording.
!∞
0 START button
Press to start CD Synchro-recording.
!¡ STANDBY button
Press to enter standby for CD Synchro-recording.
CD PLAYER (X/./>)
Use to output a Sony CD player remote signal. You can
perform the following operations using these buttons
instead of a CD player remote control.
!™ X button
Press to pause play.
!£ . button
Press to return to the start of the track currently
playing, or to the start of the previous track.
!¢ > button
Press to move to the start of the next track.
!∞ LEVEL +/- button
Use to adjust the digital input sound level without
entering the Setup menu.
!§ Control-S output terminal
By connecting the remote control to the Control-S
terminal using the supplied cable, you can use the
remote control as a wired remote. Connecting the
plug to this terminal disables the infrared beam.