Display Messages - Sony CDR-W66 Operating Instructions Manual

Miscellaneous

Display Messages

Message
No Disc
0Tr 0M00s
TOC Reading
OPC Adjust
Disc Error
PMA Writing
SkipPmaFull
Text Edited
sure Z?
Disc Full
Finalized
Track Full
Cannot Rec
Cannot Erase
No Track
Din Unlock
Auto Pause
Timer Play
Open Lock
Skip Track
Cannot Mark Now L.Sync
OPC Full
PMA Full
Rec Error
Duplicate Not Ready
Conect Err
NoFinalized
38
Meaning
Disc has not been inserted.
Time display when unrecorded disc is inserted.
Disc TOC information is read immediately after a disc is inserted.
Optimizing laser power for recording.
Disc is not inserted correctly. Cannot read disc information correctly.
Recording to PMA (Program Memory Area). (Refer to page 11.)
PMA skip/unskip area is full. Cannot record new information.
This message is a warning that although a disc name or track name has been entered, you are
trying to remove the disc without finalizing. (Refer to page 18.)
Additional recording is unavailable due to no time left enable to record.
Additional recording is unavailable due to the disc already finalized.
The maximum number of tracks (99) have been recorded, so no more tracks can be recorded.
CD is play-only, so recording is not possible, or REC MUTE has been set at the start of the
unrecorded tracks.
CD is play-only, or is a CD-R (tracks cannot be erased).
Playing an unrecorded disc, or a disc on which all tracks have been set to skip.
Power supply is turned OFF to the recording source, or is not correctly connected.
Auto-pause function is ON, and CD recorder is in standby mode.
Timer play function has turned ON when the power supply was turned ON, and CD recorder is
in play mode.
Z mode is set to N/X Disable, and the Z button has been pressed during play or pause.
The selected track has been set to skip.
Attempting to mark track number manually while auto track marking has been set.
OPC recording area is full. Cannot perform OPC Adjust.
PMA recording area is full. (refer to page 21.)
Error has occurred due to shock during recording.
Duplicate procedures preparation is not performed in correct.(refer to page 29.)
The connection of Duplicate terminal is incorrect. (refer to page 29.)
Not finalized Disc cannot play on the A-B repeat mode.