1. Manuals
  2. Brands
  3. COP Security Manuals
  4. Security Camera
  5. 15-CD53
  6. Installation and operation manual

COP Security 15-CD53 Installation And Operation Manual

Speed dome camera
Hide thumbs Also See for 15-CD53:
Table of Contents

Advertisement

Quick Links

Installation and Operation Manual
for

Speed Dome Camera

15-CD53/53W
VER:1.1
Please read the operation manual carefully
before installing and using this unit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 15-CD53 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for COP Security 15-CD53

Summary of Contents for COP Security 15-CD53

  • Page 1: Speed Dome Camera

    Installation and Operation Manual Speed Dome Camera 15-CD53/53W VER:1.1 Please read the operation manual carefully before installing and using this unit...
  • Page 2 15-CD53 Packing List Name QTY/ Unit Remark Speed Dome Camera AC24V power supply adapter English Operation Manual...
  • Page 3 15-CD53W Packing List Name QTY/ Unit Remark Speed Dome Camera AC24V power supply adapter English Operation Manual Wall Mount Bracket M6×14 stainless steel hexagon socket screw Φ 6 spring washer Φ 6 flat washer 5mm Hexagon socket wrench 3mm Hexagon socket wrench...
  • Page 4 SPECIFICATION 15-CD53 15-CD53W Items Zoom Camera CZ55HM CZ55HCM 1/4” Super HAD CCD Image Sensor NTSC:768(H)x494(V)/PAL:752x582(V) Pixels Horizontal resolution 480TVL 1Vp-p Composite Video(75Ω) Video Output Internal/External (V-Lock) SYNC System 3.9mm(Wide)~85.8mm(Tele) Lens 220X (22X Optical,10X Digital) Zoom 48dB S/N Ratio 0.05Lux 0.03Lux Mini.Illumination...

  • Page 5: Table Of Contents

    CONTENTS 1. PRECAUTIONS-------------------------------------------------------- 7 2. OPERATION---------------------------------------------------------------8 2.3 PRESET FUNCTION ---------------------------------------------------------------9 2.4 TOUR FUNCTION ------------------------------------------------------------------9 3. ID SETTING-------------------------------------------------------------13 3.1 120Ω TERMINATION SETTING ------------------------------------------------14 4. PROTOCOL SETTING----------------------------------------------- 14 5. CONSTRUCTION----------------------------------------------------- 14 5.1 INDOOR SPEED DOME CAMERA-------------------------------------------- 14 5.2OUTDOOR SPEED DOME CAMERA----------------------------------------- 15 6.
  • Page 6 Warnings！ Lightning proof equipment must be installed when the speed ● dome camera is installed in open area. ● Make sure the input voltage and normal rated power before powered up. Table of 24VAC Cable Diameter and Maximum Power Transmission distance The following table shows the cross sectional area of cable required to transmit power over the longest cable run allowed before the maximum permitted volt drop is exceeded.

  • Page 7: Precautions

    1. PRECAUTIONS 1 Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Ask qualified service personnel for servicing. 2 Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage. 3 Do not use strong or abrasive detergents when cleaning the camera body.

  • Page 8: Operation

    2.OPERATION Normal Operation： 2.0 Initial Power-up. On initial power up the speed dome camera will conduct a power-on-self-test, at the end of the self-test the monitor will momentarily display the following： “P：P_D，ID：001，V：2a1”. The Protocol and ID code will be displayed according to the installer’s preference. 2.1 Camera Function 2.1.1 Pan/Tilt Function The camera is capable of moving vertically through 0-100°and horizontally endlessly through 360°.

  • Page 9: Tour Function

    Press [CALL] + nnn + [ENTER], the onscreen display shows： CALL PRESET：nnn nnn = the number of the preset position: 1~128 2.3.3 To delete a preset position： （Only be effective to Protocol COP-2. Some special keyboards no function） Press [CLEAR] + nnn + [ENTER], the onscreen display shows：CLEAR PRESET ：nnn nnn = the number of the preset position which will be deleted.
  • Page 10 2.9 Auxiliary Functions List – The commands shown are based on 15-AU40E and 15-AU40H Joystick/Keyboard controllers. Note: “F1” key = “Menu” on 15-AU40ES keyboards. Operation Function F1 + 0 + Off Camera reset F1 + 1 + On Backlight compensation ON F1 + 1 + Off Backlight compensation OFF F1 + 2 + On...
  • Page 11 Operation Function Call + 33 + Enter Pan 180° Call + 51+ Enter Scan start Preset + 51+ Enter Set the start position of scan Call + 52+ Enter Scan stop Preset + 52+ Enter Set the end position of scan Call + 53 + Enter Auto cruise from No.1 preset position to NO.16 preset position Preset + 53+ Enter...
  • Page 12 Operation Function Call + n + Enter To call the number N preset position Preset + n + Enter To set the number N preset position Preset + n + Off Delete the number N preset position Cam + n + Enter Select the speed dome address “n”...

  • Page 13: Id Setting

    3.ID SETTING The ID of this speed dome is set by the binary coded 10-way switch. Below is the detail of setting ID code: ¯¯¯¯¯¯¯¯¯¯¯¯¯...

  • Page 14: 120Ω Termination Setting

    3.1 RS485 TERMINATION SETTING Note：It is possible to connect multiple speed dome cameras in parallel provided that No. 10 switch ID code of the farthest camera is set to “ON”. The switch will apply a 120Ω impedance offset resistance. The operation is also required for a single camera especially when the installation has long cable runs.

  • Page 15: Outdoor Speed Dome Camera

    5.2 Outdoor Speed Dome Camera 1 Wall Mount 3 AC24V Input 4 Video Output 5 RS485 data 6 Outdoor Dome Flange 7 Safety Lanyard 8 Aluminum Die Cast Housing 9 Camera 10 Acylic dome ◆ CONNECTIONS PRECAUTIONS The following connections should be made by qualified service personnel or system installers in ※...

  • Page 16: Troubleshoting

    6. TROUBLESHOTING Trouble Possible Causes Solution Power supply failure Replace No self check, no video after Cabling/connection problems Investigate and repair/replace as necessary. power up Volt drop. Replace cable with correct cross sectional area Mechanical failure Repair The camera is out of position Put straight Self-check isn’t normal, but image...

  • Page 17: Cabling And Connection Of Rs 485 Data Bus

    7. CABLING AND CONNECTION OF RS485 BUS 1. Characteristics of RS485 Bus - As specified by RS485 standards. RS485 Bus is half-duplex data transmission cables with characteristic impedance of 120 ohms. The maximum load is 32 unit loads (including main controller and controlled equipment.) The RS485 standard requires a single twisted pair daisy-chain connection between the equipment.

  • Page 18: Installation

    8. INSTALLATION 8.1 INDOOR SPEED DOME CAMERA INDOOR EMBEDDED MOUNT(Option)： （1）Cut a hole in the ceiling. （2）Mount the Speed Dome in the embedded bracket with 4 screws. （3）Fit the embedded bracket into the mounting holes and adjust 3 securing feet. Fix the embedded bracket （4）Mount the plastic ring to the camera mounting base.

  • Page 19: Outdoor Speed Dome Camera

    A. OUTDOOR WALL MOUNT A1 WITHOUT POWER BOX (Fig 2) ① Disassemble the outdoor flange and dome housing. Longest Select the Protocol and ID Curved slot code for the camera (fig.1) and mount the dome housing as follows: ○ 2 Fix the wall bracket into Position and fit the outdoor flange Outdoor Flange...
  • Page 20 B. OUTDOOR CEILING MOUNT (Option) (Fig4 & 5) ① Disassemble the Outdoor Flange and dome housing. Select the protocol and ID code for the camera (fig.1), and mount the dome housing as follows: ○ 2 Fix the ceiling bracket assembly and fit the outdoor flange. ③...
  • Page 21 C. OUTDOOR WALL MOUNT (Option) (Fig 4) ① Disassemble the outdoor flange and dome housing. Select the Protocol and ID code for the camera (fig.1) and mount the dome housing as follows: ○ 2 Fix the wall bracket into Position and fit the outdoor flange To the bracket neck with screws supplied.
  • Page 22 E. OUTDOOR CORNER MOUNT (Option) (fig 6) ① Disassemble the outdoor flange and dome housing. Select the protocol and ID code for the camera(fig.1) and mount the dome housing as follows: ○ 2 Mount the corner bracket Outdoor Flange Longest Curved slot and fit the wall bracket with the screws provided, fix the outdoor flange to the neck of...

  • Page 23: Camera Osd Menu

    9. Camera On Screen Display Function Menu. Main Menu ( Page 1. ) S E T U P M E N U ( 1 / 3 ) W H I T E B A L A N C E I R I S A G C ･...

  • Page 24: Sub Menu

    Sub Menu White Balance W H I T E B A L A N C E C O L O R O F F A U T O E X T A T W R - - - ■ - - B A W B R - - - ■...
  • Page 25 AGC ･ SENS A G C ▪ S E N S A G C A U T O - - - ■ - - - S E N S A U T O ■ - - - - - - This is used to select the 「...
  • Page 26 ZOOM ･ FOCUS Z O O M ▪ F O C U S D I G I T A L Z O O M O F F Z O O M S P E E D - - - ■ - - F O C U S S P E E D - - - ■...
  • Page 27 This is used to set up the ID figures & position on the screen. (Title setting) 1.TITLE start position selector. 2.TITLE Character selector. 3.TITLE display position UP or DOWN selector. After setting, push [EXIT] key to go back to the main menu page. RESET (“PRESET”...
  • Page 28 POSITION (FEATURE NOT SUPPORTED) P O S I T I O N A L A R M N O = 0 F R E E Z E O F F P O S I T I O N N O = 1 Z O O M S P E E D - - - ■...
  • Page 29 This is used to select the camera power on state. 1.「BLUE BACK」 ：When this setting is turned ON a blue background will be displayed when power is connected to the camera. If this feature has not been enabled a normal image will be displayed. 2.「POSITION OFF」: The lens position is set to its current position upon receiving power.
  • Page 30 ZOOM+AF Z O O M + A F Z O O M + A F O F F S L E E P O F F This setting controls how frequently the auto focus feature is used. 1. Zoom + AF: Turning this feature ON disables the zoom and auto focus function. The lens will focus once and then maintain the current zoom and focus levels.
  • Page 31 1:N : One controller to control many Cameras. (Redundant feature) After setting, push [EXIT] key to go back to the main menu page. CROSS LINE C R O S S L I N E O F F This enables / disables the cross line display. Cross line ON/OFF select, set ON cross line is displayed, set OFF cross line is hidden.

This manual is also suitable for:

15-cd53w

Table of Contents