Special; Exit - Samsung SVD-4400 User Manual

High resolution vandal-resistant dome camera
Table of Contents

Advertisement

Operating Your Camera
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
MAIN SETUP
Select the function by moving
1.LENS
up or down direction of
2.EXPOSURE
function setup switch.
3.WHITE BAL
4.BACKLIGHT
5.SSNR
6.DAY/NIGHT
7.IMAGE ADJ

8.SPECIAL

9.EXIT

2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'EXIT' and press the Function Setup switch.
Notes
• A n item with the
icon also has sub menus. To select a sub menu, select an item
with the icon and press the Function Setup switch.
• A n item with the - - - icon is unavailable due to function settings.
LENS
Using this function, you can control screen brightness.
1. When the SETUP menu screen is displayed, select 'LENS' by using the Function
Setup switch so that the arrow indicates 'LENS'.
MAIN SETUP
1.LENS
2.EXPOSURE
14
COLOR DOME CAMERA
DC
Change the status by
moving right or left
direction of function setup
ATW
switch.
OFF
ON
AUTO
DC
User's Manual
DC : Select Auto Iris Lens
• When DC is selected, you can control screen
brightness. The range of brightness control is
between 1 and 70. Adjust the brightness
appropriately for optimal screen brightness.
EXPOSURE
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
1. When the SETUP menu screen is displayed, select
'EXPOSURE' by using the Function Setup switch so that
the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
SHUTTER : Because of using a DC lens, the shutter speed is fixed.
(NTSC mode l: 1/60 sec, PAL model : 1/50 sec)
When flickering occurs on the screen, select the A.FLK mode using the
Function Setup switch.
- A.FLK : Select this when you experience picture flicker, which can happen when there is a
clash with the frequency of the installed lighting.
Notes
• When the SHUTTER is set to A.FLK mode, SENS-UP will be disabled.
COLOR DOME CAMERA
DC
ATW
15
User's Manual

Advertisement

Table of Contents
loading

Table of Contents