Advertisement
Installing the Light Kit on Fans With Non-Removable Switch Housing
1. Uninstall the two attachment screws from the switch housing cover.
2. Remove the plug or screw from the center of the switch housing cover.
NOTE: Save the plug button and switch housing cap should you choose to
remove the light fixture in the future.
3. Thread the switch housing cover onto the light kit fitter. Align the screw
holes in the light kit fitter with the screw holes in the switch housing cover.
4. Install the nut and washer onto the threaded rod from the light kit fitter to
secure the switch housing cover.
5. Remove the wire connectors from the two wires in the switch housing
labeled "Connect Light Here" or "For Light Use." One wire is white and the
other wire is black with a white stripe.
6. Feed the two wires from the switch housing through the threaded rod in
the light kit fitter.
7. Use the two attachment screws removed from the lower switch housing
and the lock washers on the red tag of the light kit fitter. Install the screws
into the light kit and the housing. Securely tighten the two screws.
WARNING: Improper installation could cause the light fixture to
fall, or result in electrical shock or personal injury.
Switch
Housing
Cover
Nut
Washer
Screw
Hole
Attachment
Screw
Light Kit Fitter
Steps 3-7
6
43551-01 • 04/20/09 • Hunter Fan Company
Non-Removable Switch
Housing
Switch
Housing
Cover
Attachment
Screw
Steps 1-2
Plug
Wire
Connectors
Step 5
Advertisement
