Ericsson Dialog 3210 User Manual page 67

Program on Dialog 3211/3212
Program
Access
Access
Program
(continued)
Dialog Dialog
3212 3211
You have 6 programmable ringing signals on your
telephone. The different signals can be programmed on access
lines, additional lines and multiple represented lines.
Press
Press the corresponding line key
A digit (0-6) is shown in the display (3212 telephone only).
Select the ringing signal you want to use
according to the list below
0 = Silent.
1 = Periodic ringing signal.
2 = Delayed periodic ringing signal.
3 = One muted ringing signal.
4 = One muted delayed ringing signal.
5 = Immediate speech connection with single tone burst
controlled by function key.
6 = Immediate speech connection with single tone burst.
Note: Options 5 and 6 are not available for multiple represented lines.
Press
Press to finish programming
Press to clear the display during programming
Note: 3212 telephone only.
Dialog
3210
Programming
65