Send Caller Identity Code At Transfer; Dialling During A Connected Call - Ericsson Dialog 3210 User Manual

SEND CALLER IDENTITY CODE AT TRANSFER

Inquiry
Transfer

DIALLING DURING A CONNECTED CALL

Dialog Dialog
3212 3211
When transferring a call you can send the caller´s identity
code or number to the receiver´s display.
You have speech connection with an external party on
Access 1.
Press to put the call on hold
Note: You can also press Access 2.
Press
Dial the caller´s identity code or number and press
Call the second party
Press before or after answer
The ongoing call is transferred with the caller´s identity code
or number.
Note: You can only use this function if the receiver´s telephone is
programmed to handle identity codes.
This function is only available in newer versions of the telephone
exchange.
When calling interactive tele services, e.g. telephone banks,
you need to use Dual Tone Multi Frequency (DTMF) signals.
If your exchange is not already programmed to automatically
convert your entered digits into DTMF signals, you need to
activate the function during the call.
During an ongoing call:
Press and dial the requested digits
Entered digits are transferred as DTMF signals.
Dialog
3210
During Calls
15