Paging - Ericsson Dialog 3210 User Manual

Paging

PAGING
(optional)
Paging receivers without a display and paging via lamp signals
To initiate
To answer
52
Persons equipped with a wireless paging receiver or assigned
to a lamp signal, can be paged from a telephone set.
Depending on the type of paging system it is possible to
send digit messages or voice messages to the paged person.
Paging can also be initiated and answered during an ongoing
call. Make an Inquiry call and proceed according to the
appropriate procedure for the type of connected paging
system. You can then either return to the ongoing call or
transfer the paging call to the person on the call that was put
on hold. If this person is an external subscriber, your
exchange must be programmed for this function.
If you receive a congestion tone when paging, this indicates
that the paged person has his paging receiver in the charging
rack and is probably out of the office.
When there is no answer or a busy tone, keep the handset off hook:
Press
Wait for an answer with the handset off hook.
If you want to start paging without calling the person:
Press
Dial the extension number and press
Wait for an answer with the handset off hook.
From any telephone within the system and within the
predetermined paging time:
Press
Dial your own extension number and press
Or if only one paging call is permitted at the time:
Press
Dialog Dialog
3210 3211
Dialog
3212