Outgoing Calls - Ericsson Dialog 3210 User Manual

Outgoing Calls

MAKE CALLS
Internal calls
External calls
or
Handsfree
8
How to make internal and external calls:
Lift the handset and proceed depending on call type:
Dial the extension number
Dial the digit or digits to get an external line
Dial tone.
Note: The particular digit or digits used in your office, e.g. 0 or 00.
Dial the external number
Press to end the call
Note: If you receive a queue tone when the digit or digits to get an
external line are dialled (optional function Least Cost Routing is
used in the system), keep waiting. Once a line becomes free you will
receive a dial tone. If a warning tone is heard, the selected line is
marked "Expensive".
(3211 and 3212 telephones only)
With the handset on hook:
Dial the number
You are connected via the loudspeaker and microphone.
Press to terminate a handsfree call
Note: You can make your calls faster by using common abbreviated
numbers and by using your own programmed abbreviated numbers.
See section "Abbreviated numbers".
Dialog Dialog
3210 3211
Dialog
3212