Send Caller Identity Code At Transfer - Ericsson Dialog 3210 User Manual

g
Inquiry
* 7 7 *
z #
g
Transfer
Dialog 3210, 3211 and 3212
To resume the call on another extension:
z
Call the extension where the call was put on hold
8
Press
Notes:
You can also press: On hold/Pick-up (function key pre-
programmed by you).
France press
If your number is multiple represented on the telephone,
you can also press the key that represents your number.

Send caller identity code at transfer

When transferring a call you can send the caller´s identity code or
number to the receiver´s display.
You have speech connection with an external party on Access 1.
Press to put the call on hold
Note: You can also press Access 2.
Press
Dial the caller´s identity code or number and press
z
Call the second party
Press before or after answer
The ongoing call is transferred with the caller´s identity code or
number.
Note: You can only use this function if the receiver´s
telephone is programmed to handle identity codes. This
function is only available in newer versions of the telephone
exchange.
4 6
; Sweden press
During Calls
19