Setup The Wavecad Program; Card & Socket Services - Lucent Technologies orinoco User Manual

Setup the WaveCAD Program

To allow MS-DOS-based computers to "identify" the presence of a PC Card
in the PC Card slot, the computer needs dedicated software that will enable
it to do so. For your ORiNOCO PC Card this can either be:
Card & Socket services software as provided by various software
vendors, or
The Card Access Driver (wlancad.sys), a Lucent Technologies
proprietary driver, that was designed specifically for ORiNOCO cards.
The card software must be loaded before any other program (network driver
or utility) tries to access the ORiNOCO card.
In this section, we describe the proper WaveCAD installation procedure and
settings for the following systems:
Computers using Card & Socket Services
Intel 82365 PCIC based computers
Card & Socket Services
To ensure the WaveCAD is always run at start-up time, you must edit the
system file "
CONFIG.SYS
the path and filename of the WaveCAD program.
" to include a "
DEVICE
ORINOCO PC Card - User's Guide
Installation for MS-DOS
D
" statement that will identify
D
D-5