Cover - Go Spas GO 630 Owner's Manual

Place the insulated cover on your hot tub. Keeping the cover in place anytime the
hot tub is not in use reduces the heating time and minimizes operating costs. The
time required for initial heat-up varies depending on the starting water
temperature, ambient temperature, and the capacity of your hot tub.
1. Lock-down tab
2. Double-stitched seams
3. Marine-grade cover material
4. Edge overlap material
5. Grip handle
6. Aluminum channel
Use the lock-down tabs to prevent access to the
hot tub by children and to prevent the wind from
lifting the cover off.
Sitting, standing, and snow buildup on the cover will break the cover. Dragging it
over rough surfaces will scuff or tear the fabric. Always lift by the handles or use
the optional cover lift device.
C o v e r
Figure 22 - Cover Callouts
7. Heat-sealed insulation
8. Chemical-resistant vapor
barrier
9. Polystyrene seam stoppers
10. Reinforced edges
11. Breathable underside material
Page 27
For HELP, call 727.573.9611
Figure 23 -
Lockdown Tabs