The following dimensions can be used to determine the proper location of
submerged conduits in concrete slab installations. All dimensions are made from
the outside of the hot tub's frame with the access panels removed. The topside
control panel is shown at bottom of diagram for reference.
Figure 2 – Conduit Entry Location Reference Points
Model
GO 620/GO630
GO 621/GO631
GO622/GO632
Table 1 – Conduit Entry Location Dimensions
10) Consider positioning your
wind. Just as people can get cold on cool/windy days, so can your hot tub.
Windy environments can significantly increase operating costs.
11) Consider using an insulating pad. In cold climates, the ground can rob heat
from the
hot tub
and increase your operating costs.
Dimension A
Dimension B
1202
27" (68.5 cm)
11" (28 cm)
1203
24" (61 cm)
12" (30 cm)
1204
Call
hot tub
out of or adequately protecting it from the
Page 8
For HELP, call 727.573.9611
Call