Startup - Go Spas GO 630 Owner's Manual

Important – Read these step-by-step startup procedures before starting your hot
tub. Failure to follow any of these steps listed may result in damage to the
equipment and may void your warranty.
Note: If you are unsure of any of the above startup procedures, please call our
customer care center, at 727.573.9611. For best results, read each step in
its entirety before proceeding.
Caution: Running the hot tub pump dry (without water running through it) can
cause IMMEDIATE damage and will void the warranty! Be sure that
the hot tub is installed properly in accordance with the instructions in
this manual.
Refer to the following picture for an explanation of some of your hot tub's
controls, components, and technical terms. Note that not all models have all
features and components.
S t a r t u p
Figure 15 – Callouts
Page 18
For HELP, call 727.573.9611