Warranty - Measurement Computing 101 Operating Manual

Warranty

Measurement Specialties, Inc. instruments are
warranted during a period of one year from
date of shipment to original purchaser to be
free from defects in material and workmanship.
The liability of Seller under this warranty is
limited to replacing or repairing any instrument
or component thereof which is returned by
Buyer, at Buyer's expense, during such period
and which has not been subjected to misuse,
neglect, improper installation, repair, alteration,
or accident. Seller shall have the right to final
determination as to the existence and cause of
a defect. In no event shall Seller be liable for
collateral or consequential damages. This
warrant is in lieu of any other warranty,
expressed, implied, or statutory; and no
agreement extending or modifying it will be
binding upon Seller unless in writing and
signed by a duly authorized officer.
Receiving Inspection
Every Measurement Specialties, Inc.
instrument is carefully inspected and is in
perfect working condition at the time of
shipment. Each instrument should be checked
as soon as it is received. If the unit is damaged
in any way, or fails to operate, a claim should
immediately be filed with the transportation
company.
Service Concerns
If a Measurement Specialties, Inc. instrument
requires service, first contact the nearest
Measurement Specialties, Inc. representative.
They may be able to solve the problem without
returning the unit to the factory. If it is
determined that factory service is required, call
Customer Service at the regional headquarters
for an RMA number before return.
Operating Manual Model 101, Revision 1
Returns
All units being returned to the factory require
an RMA (Return Material Authorization)
number before they will be accepted. This
number may be obtained by calling Customer
Service at the regional headquarters with the
following information; model number(s),
quantity, serial number(s), and symptoms of
the problem, if being returned for service. You
must include the original purchase order
number if under warranty.
Inquiries
Address all inquiries on operation or
applications to the End User Applications
Support as follows:
Global Headquarters
1000 Lucas Way
Hampton, VA 23666, USA
Tel: +1 757 766 1500
Vibration Sensors Design Center
32 Journey, Suite 150
Aliso Viejo, CA 92656, USA
Tel: +1 949 716 5377
European Headquarters
105 av. du Général Eisenhower
BP 1036, 31023 Toulouse Cedex, France
Tel: +33 (0) 561 194 543
Asian Headquarters
Measurement Specialties (China), Ltd.
F1.6-4D, Tian An Development Compund
Shenzhen, China 518048
Tel: +86 755 8330 1004
Email: vibration@meas-spec.com
Web: www.meas-spec.com/vibration
Page 3 of 14