Installation In A Home - Brix Streamer SIR-STRPNP1 User Manual

Installation in a home with the SIR-STRHK1 kit (sold separately)
Note: Do not put Streamer in the docking station until you have completed the installation.
1. Plug the audio cable's mini
3. Plug the antenna into the back
connector into the back of the
of the cradle until it is firmly
cradle, as shown. Plug the
secure.
audio cable's white (L ch,) and
red (R ch.) connectors into your
audio system.
2. Plug the AC cord into the
power supply, then plug the
power supply into the back of
the cradle, as shown. Don't plug
the AC cord into a wall outlet
until the installation is
completed.
10
Installation in a home (continued)
4. Due to the paths of SIRIUS satellites over the
US, the best location for the antenna in your
home depends on where you live. Use the map
below as a general placement guideline—some
experimentation may be needed to obtain the best
results. In major US cities, you may also be able to
receive the signal from SIRIUS ground repeaters,
which may allow you to place the antenna away
from a window. In all cases, since the antenna is
weather-proof if necessary you can also locate it
outside, clear of any overhead obstructions. (This is
especially important if your house has an extended
roof or extended window frame structures.) See
page 30 for more information about using the
ANTENNA SIGNAL screen to aim the antenna.
Streamer User Guide Streamer User Guidel
Section 1: Place the antenna at an EAST-FACING
window
Section 2: Place the antenna OUTSIDE, away from
any overhead obstructions
Section 3: Place the antenna at a WEST-FACING
window
Section 4: Place the antenna at a NORTH- or EAST-
FACING window
Section 5: Place the antenna at a NORTH-FACING
window
Section 6: Place the antenna at a WEST- or NORTH-
FACING window
11