Time Based Features - Brix Streamer SIR-STRPNP1 User Manual

The following adjustment options are possible:
1. Automatic Memory Search function - On or Off.
Use the Encoder Knob to select between the 2
options by highlighting the desired selection. Then
press the Encoder Knob to enter the option.
2. Clear All Memory Locations. Momentarily press
the Encoder Knob; a prompt display screen
appears confirming - Are You Sure? Select "Yes"
or "No" and press the Encoder Knob.

Time Based Features

The following adjustments are possible:
Clock
Alarm Clock
Program Alert
Auto Shutdown
Sleep Mode
28
Upon entering this mode, rotate the Encoder Knob
to highlight the desired function and press the
Encoder Knob.
NOTE: No button activity for 10 seconds will also
exit the desired (highlighted) function.
Clock
When entering this menu option, you can set up
the clock shown on the default display, based on
the format desired, and the time zone in which you
reside.The clock data is provided via the Sirius
Satellite stream, and will update based on the
received signal.
Streamer User Guide
Format:
The clock format option provides:
12 Hour (Default)
24 Hour
Use the Encoder Knob to highlight the desired
format and press the Encoder Knob.
Time Zone:
The Time Zone option provides:
(GMT-9:00) Alaska
(GMT-8:00) Pacific
(GMT-7:00) Mountain
(GMT-6:00) Central
(GMT-5:00) Eastern
(GMT-4:00) Atlantic
(GMT-3:30) Newfoundland (Abbreviated as
(GMT-3:30 Newfndlnd)
Use the Encoder Knob to highlight the desired
time zone and then press the Encoder Knob.
Streamer User Guide
Daylight Savings Time (DST) Observance:
Activate this function if your area is subject to DST;
Turn the Navigation Wheel to toggle between DST
Observed (default) or DST Not Observed.
Alarm Clock:
When this menu option is highlighted and selected,
you will be able to set the unit to turn on at
a specific time. The last selected stream prior to
shutdown will be present when the Alarm feature
is activated. Alarm appears on the first line of the
display followed by the alarm options:
Set Alarm (Default-Off)
Use the Encoder Knob to toggle between Alarm
On or Alarm Off and press the Encoder Knob for
desired alarm status.
29