Rotate the Encoder Knob Wheel to toggle through
the desired sleep times. When the desired time is
highlighted, press the Encoder Knob. The unit
will now turn off after the selected time has expired.
Factory Default
The Factory Default screen displays the text
Restore Default Settings with the following
adjustments: Yes/No
Upon entering this mode, rotating the Encoder
Knob toggles between the "Yes" or "No" function/
display selection. If "Yes" is chosen, the unit reverts
to the original factory settings for the following
parameters:
•
All Presets revert to empty
•
Auto Dimming On
•
Display Contrast to 50%
•
Display Mode to Auto
32
•
FM Modulator to On
•
Audio Output Level to 50%
•
Access to all skipped Shuttles (Locked streams
remain locked)
•
Memory Search On
•
Memory Locations are erased
•
12 Hour Clock Format
•
Eastern Time Zone
•
Daylight Savings Time Observed
0 01
Channel Name
Default Display
Artist Na
Restore Defualt Settings?
Yes
Song Title
No
Category 12:00pm
Streamer User Guide
Troubleshooting
FAULT
PROBABLE
CAUSE
Streamer does
Blown fuse, power cable not
not turn on
properly connected
Satellite antenna not
Check antenna
connected
display message
Antenna or cable is faulty
FM modulator frequency
Audio static or loss
contains static
of clarity
Vehicle antenna not
connected to radio
No signal on
Check for obstacles over or
shuttle dislplay
around antenna
1. Audio Cables not
No sound
connected
2. Incorrect FM modulator
frequency
A
Streamer User Guide
Specifications
Audio Output 650mV RMS Maximum
REMEDY
(100-250 ohms)
Fuse 3A Slow Blow
Check fuse, check
power cable
Power Supply 10-16V, Negative Ground, DC
Check satellite
connection to shuttle
Dimensions 138mm W x 92mm H x 48mm D
Contact system installer
(5 3/8" W x 3 5/8" H x 1 7/8" D)
or vendor
Switch to another FM
frequency
Check vehicle antenna
cable
Change location to
eliminate nearby
obstacles (bridge, etc.)
1. Check cables at
Shuttle and radio
2. Select another FM
modulator frequency.
33