Audio Level; Antenna Aiming; Memory Options - Brix Streamer SIR-STRPNP1 User Manual

Upon adding a stream, the text "Lock" is removed
from alongside the stream number/name.
L o c k O p t i o n s Lock Options
0 0 1
Song Title
0 0 2 Song Title
0 0 3 Song Title
Edit Code
004 Song Title
0 0 5 Song Title
Lock/Unlock Default Code Function
The first time the Lock/Unlock function is
accessed, the user must enter the default lock
code. The default lock code is "0000". This code
can be maintained or changed. To change the
default lock code perform the following procedure:
1. Press and hold the MODE button to access the
User Menu.
2. Rotate the Encoder Knob to select the "Lock
Options".
3. Press the Encoder Knob.
4. Rotate the Encoder Knob to highlight
"Edit Code".
26
5. Press the Encoder Knob.
6. Enter the default code "0000".
7. The "New Code" prompt will appear. Enter your
new four digit code using the 0-9 nymber buttons.
Lock You will then be prompted to confirm the new code
by entering your code again.
8. The lock code is now changed.
Edit Code
Upon entering this mode, the user is prompted to
enter the current four digit numerical code being
used to lock/unlock stream access. Once the
correct code has been entered, the user is
prompted to enter the new 4-digit code twice. The
second entry is requested for confirmation.
L o c k O p t i o n s
L o c k / U n l o c k
Streamer User Guide
Lock Options
0 0 1 Enter Code
Song Title
0 0 2 Song Title
1 2 3 4
Lock
0 0 3 Song Title _ _ _ _
004 Song Title
0 0 5 Song Title

Audio Level

Upon entering this mode, a 10 segment
horizontal bar graph is displayed with a "-" sign
to the left and a "+" sign to the right. The current
setting is indicated on the bar graph. Rotating
the Encoder Knob will adjust the bar graph
audio level indication and audio gain,
accordingly. To select and exit this function,
press the Encoder Knob. No button activity for
10 seconds will also exit this function.
Streamer User Guide

Antenna Aiming

Upon entering this mode, a 10 segment horizontal
bar graph is displayed with a "-" sign to the left and
a "+" sign to the right. The current setting is
indicated on the bar graph. Moving the antenna
location adjusts the bar graph signal strength
indication, thus ensuring optimum reception.To exit
this function,press the Encoder Knob.

Memory Options

In this mode, the user can turn the Memory Search
Function (S-Seek) ON or OFF. In addition, all 10
Memory Locations can be cleared. On the display,
the top line displays the text Memory Options.
27