Installation In A Vehicle - Brix Streamer SIR-STRPNP1 User Manual

Vehicle Docking Kit Installation Guide for SIR-STRVK1 or SIR-STRVK2 Kit (sold seperately)
Note: Do not put Streamer in the docking station until you have completed the installation.
Note: The SIR-STRVK1 Kit doesn't come with the shown cassette
SIR-STRVK1 Contents:
adapter because it has a wireless FM transmitter.
• Installation Guide.
• Vehicle docking cradle with
wireless FM transmitter.
• Suction Cup Mount.
• Heavy-duty antenna mount (not
shown).
• Cigarette lighter power supply.
• Magnetic roof-mount SIRIUS
antenna.
SIR-STRVK2 Contents:
• Installation Guide.
• Vehicle docking cradle.
• Base mount.
• Cassette adapter.
• Cigarette lighter power supply.
• Audio cable.
• Magnetic roof-mount SIRIUS
antenna.
6
Installation in a Vehicle (continued)
1. Determine where you want to
mount Streamer.
• Do not install Streamer where
it may obstruct your view through
the windshield or your view of
your vehicle's indicator displays.
• Do not install Streamer where
it will hinder your access to the
vehicle's controls.
• Do not install Streamer where
it may hinder the function of
safety devices such as an
airbag. Doing so may prevent
the air-bag from functioning
properly in the event of an
accident.
• Find a location that provides
good visibility of and access to
Streamer's front panel.
• The Brix Group strongly
recommends that you mount
Streamer User Guide
Streamer User Guide
cradle to the base or to the
Streamer in a location where the
suction cup mount.
base can be attached with the
provided screws or on the 5. Plug the cigarette lighter
windshield with the provided adapter into the back of the cradle.
suction-cup mount. Don't plug the adapter into the
2. You can bend the leaves on
cigarette lighter until the
the base to conform to curved
installation is completed.
mounting surfaces.
6A. Plug the cassette adapter into
3. Peel the covering away from
the back of the cradle (SIRSTRVK2
the adhesive on the bottom of
kit only). For the SIR-STRVK1 kit,
the base and adhere it to the
tune your radio to one of four FM
mounting surface. Use the
stations on the side of the vehicle
provided screws to securely
dock
attach the base to the surface.
6B. If your car stereo has an aux
• If using screws, be sure that
input, plug the supplied audio
you do not damage wiring or
cable into the back of the cradle
other systems on the other side
instead of the cassette adapter.
of the mounting surface.
Plug the audio cable's white (L
4. Using the provided screws,
ch,) and red (R ch.) connectors
assemble the docking station into your car stereo.
7