Motion Alarm Schedule; Motion Alarm Handle Method Setup - LJD Digital Security COLOSSUS Quick Start User Manual

Note: In order to make the cameras start recording, in "Recording" menu, you must enable recording schedule and set "Rec Type" as "Motion Detection" or "Motion | Alarm".
Please refer to chapter 5.12 for recording setup.
Step 7: Motion alarm schedule: When the motion alarm is happened in schedule, DVR will response such as "On Screen Warning", "Audible Warning", "Upload to Center"
and "Trigger Alarm Output". You can setup 4 time periods for one day and 7 days for one week.
Note: Time periods in one day can not be repeat.
Step 8: Motion alarm handle method setup: You can select one or more handle methods such as "On Screen Warning", "Audible Warning", "Upload to Center" and "Trigger
Alarm Output".
Description: If "On Screen Warning" is enabled, when there is motion alarm happened and DVR is in preview mode, DVR will pop-up the related camera. If you trigger more
than one camera, DVR will pop-up them one by one every 10 seconds. When the motion alarm is disappeared, DVR will restore preview mode.
Step 9: Save motion alarm setup: Press "Confirm" button to return "Image Setup" menu. In the "Image Setup" menu, press "Confirm" button to save the current camera
parameters.
Step 10: Save all cameras: You can repeat from step2 to step8 to setup motion detection parameters for other cameras. Also you can copy the parameters of one camera to any
other cameras.
Note: Motion alarm area can not be copied.
If you want to disable motion alarm area and motion alarm policy, you just need to select the motion alarm sensitivity as "Off"
Page 7