One Channel Playback; Two Channels Playback; File List Box; Backup Devices - LJD Digital Security COLOSSUS Quick Start User Manual

One Channel Playback

In preview or menu modes, press [PLAY] key and enter your username and password.
[pic one or two channels playback]
If you select anything other than "No" for "Second" then it will search and play data for two channels.
The "Second" refers to the second channel number to display.
A Maximum of two channels can be played back simultaneously.
Rec type: Use this to search only by specific recording e.g. Mot Det to search for events recorded when motion has been detected.
Time Section: This displays two sets of date and time, the left being the date and time to search from and the right being the time to search to.
You must make sure that the first date is not before the last date.
Once this is entered press enter to search between these times.
Play by Time: pressing enter on this option will bypass the file screen below and play back directly starting from the first time and playing until the second time.
File list box: this area will display any files found by the search. Once the files are highlighted the following actions can be taken:
•
To scroll the file list use [Up] and [Down]
•
To play back the file press [Enter]
•
To select the file for copying press [Edit]
Select Page: In the file list box, each page will only display 8 files. If the matched files are more than 8, you can select page to list other files. 500 pages (4000 files) can be
searched in one time. You can use numeric keys or 【↑】【↓】keys to select page.
Backup Devices: You can select USB flash, USB HDD, USB CD-R/W or IDE CD-R/W to backup the files or clips.
Copy: Start to backup.
Backup Today: Backup all recorded files of today.

Three kinds of playback mode

1. Search and playback file: In the playback interface, you can select main channel, second channel (2-ch playback), record type, time section. Move "Active Frame" to

Two Channels Playback

Page 3