Wash System; Drying System; Overfill Protection Float - GE Lave-vaisselle Owner's Manual

Drying
Lights up when the dishwasher is drying after the final rinse.
Clean
Displayed when a wash cycle is complete. The light will remain ON until the door is
opened.
Sanitized
Displayed when the cycle has met sanitization conditions. The light will remain ON until
the door is opened.
Add Rinse Aid
Fill the rinse aid dispenser when Add Rinse Aid is lit. A rinse aid prevents water from
forming droplets that dry as spots or streaks. If the rinse aid dispenser is empty, the light
glows when you select a cycle or while a cycle is running.

Wash System

The six-level wash system provides excellent cleaning results. Three levels of filtration and
a soil collector system filter the wash water and prevent food particles from redepositing
on the clean dishes.
• The wash water continuously flows through the filter, trapping food particles.
• Two water jets, located under the spray arm, remove the food particles from the filter.
• A coarse strainer prevents bones, pits and other large objects from entering the pump
system.
NOTE: Periodically check the coarse strainer and remove any objects on the strainer.

Drying System

During drying, you can see hot vapor escaping through the vent
at the upper left corner of the door. This is normal as the heat
dries your dishes.
IMPORTANT: The vapor is hot. Do not touch the vent.

Overfill Protection Float

The overfill protection float (in the front right corner of the dishwasher
tub) keeps the dishwasher from overfilling. It must be in place for the
dishwasher to operate.
Check under the float for objects that may keep the protector from
moving up or down.
English
22