Wash Cycles Chart; Starting A Wash Program - GE GLFS1224SSI Use & Care Manual

Wash Cycles Chart

Program Cycle Information
Strong For the heavy soiled loads, such as
pots, pans, casserole dishes and
dishes that have been sitting with
dried food on them for a while.
Normal For normal soiled loads, such as pots,
plates, glasses and lightly soiled pans.
(IEC-EN
Standard daily cycle.
50242)
Economy For lightly soiled loads, such as plates,
glasses, bowls and lightly soiled pans.
Rinse For dishes that only need to be rinsed
and dried
Glass For lightly soiled loads, such as
glasses, crystal and fine china.
Soak Prewash of dishes pots and pans while
waiting for the load to be completed.

Starting a wash program

1. Slide out the bottom and upper racks, ar-
range dishes on the racks and push them
back in. Load the lower rack first. Do not
use the dishwasher to wash fine expen-
sive china.
2. Close the door. Make sure door is firmly
closed. Note: A click can be heard when
the door is properly closed.
3. Plug power cord into outlet. The required
power supply is 220-240 V 50 Hz. Outlet
must supply 250 V 12 A.
Detergent
Stages of cycle
Pre/Main
Prewash
Prewash 50 ºC
Wash 60 ºC
Rinse 70 ºC
Dry
Prewash
Prewash
Wash 50 ºC
Rinse 70 ºC
Dry
Prewash
Wash 45 ºC
Rinse 60 ºC
Dry
Wash 45 ºC
Rinse 70 ºC
Dry
Prewash
Wash 40 ºC
Rinse 70 ºC
Dry
Prewash
4. Turn on the water supply.
5. Press ON/OFF pad.
6. According to the soil level of the load, se-
lect the desired program by pressing PRO-
GRAM SELECTION pad.
7. Press START/PAUSE pad to start the se-
lected cycle.
Rinse
Agent
5/22 g
5/25 g
22 g
15 g
27