Startup Channel; Cttannel Playtype; Channel Play Type; Osd Setting - Dish TV S7000 User Manual

10.5 Startup Channel

Press [OK] key to enter "Startup Channel"
menu, and you will see the screen like
below:
If the setting of "Boot on Channel" is
"On", it means the following two items
can be work. If the setting is "Off", it
means the "Boot on Channel" function
can't work.
In the "Mode" item, you can set the
"Startup Channel" as "TV channel"
mode or "Radio channel" mode.
In "Startup Channel" menu, you can
press [OK] key to open the channel
list, and select the channel that you
want it to startup, press [OK] key again
to confirm.

10.6 Channel Play type

1 Press [OK] key to enter "Channel Play
Type" menu, and you can select the
"playing channels" as "Free",
"Scrambled" or "All".
2 For Example: If you select "Free", in full
screen play, all scrambled channels will
be skipped when you change channels
by use [Channel up/Channel Down] key.
3 Press [Exit] to draw back from "Channel
Setup" menu

10.7OSD Setting

When you input to "~SD Setting" menu, you
will see a screen like below:
1 Subtitle Display: You can press [Volume
Up/Volume Down] key to select "On" or
"Off'.If the current channel has subtitle
information, it will be showed up while
this function is "On". If this function is
"Off", there won't show up subtitle
information even if the current channel
has subtitle information.
2 OSD Timeout: When you switch
channels in full screen, there will show
up some information about current
channel on the lower of the screen.
And regarding to the duration of these
information show up on the screen, you
can press [Volume Up/Volume Down]
key to set the time. The range of the
duration is "1 second - 10seconds".