Adjusting Levels - Alpine IVA-M700R Owner's Manual

1
2
3
140
1 5
2
3 4
RETURN
LEVEL
Audio Processor
Operation (Optional)

Adjusting Levels

Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
Press the 2 (LEVEL) button. The mode
changes to the Level Adjustment mode.
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way system divider is
connected:
→ L-Low → R-Low → F-High/L
R-High/R ← R-High/L ← F-High/R ←
When two 2-way system dividers are connected:
→ L-Low → R-Low → L-High → R-High
↑
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment, and Rear adjustment modes,
↓
and the display also changes.
→ L-Low → R-Low → L-High → R-High
When only one 3-way divider is connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
When two 3-way dividers are connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
↑
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
↓
and the display also changes.
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
English
(To be continued)