Charging - Moneual RYDIS Hybrid H67 Pro User Manual

Charging

If you have prepared the charging station, main body, and remote control, you must then charge the RYDIS H67 Pro to
use it. To charge the RYDIS H67 Pro, follow these steps:
1
Turn the system power switch on.
2
Hold the RYDIS H67 Pro with both hands and put it on the charging station.
Match the terminals of the RYDIS H67 Pro with the terminals of the
charging station.
Put the RYDIS H67 Pro in the front center of the charging station and push
the RYDIS H67 Pro toward the charging station slowly until the status
indicator turns solid red.
Blue lamp: charging station power on indicator
Red lamp: H67 Pro charging indicator
3
Use the RYDIS H67 Pro after charging.
It takes up to 2 hours to charge the battery fully.
Battery Status Charging
Indicator
Blinking every second
Charging completed Solid lamp with 3 bars without blinking
Low battery Blinking 4 times every second
Installing
23