Placing The System; System Connections - Sharp HT-SL72 Operation Manual

Placing the system

Installation image:
TV
Amplifier
BD Player DVD player
Place the system as shown.
Remove the protective film covering the Amplifier, Sound
Bar and Subwoofer before using the system.

System connections

Make sure to unplug the AC power cord before making any connections.
Subwoofer
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Speaker connection
Connect the wire without insulation tube to the minus (–)
terminal, and the wire with red and white insulation tube to
the plus (+) terminal.
Caution:
●
Use speaker with an impedance of 3 ohms or more, as
lower impedance speaker can damage the unit.
R
Red
AC outlet
AC 120 V ~ 60 Hz
Notes:
●
As the sound from the system is omni-directional, you
can place the speaker anywhere you like. However, it is
recommended to place it as close to the TV as possible.
●
The front panel of the speaker is not removable.
●
If the Amplifier is wall mounted behind the TV, make
sure the distance between the TV and Amplifier are not
less than 8" (20cm) to avoid wireless interruption.
Caution:
Do not change the installation direction when the unit is
turned on.
Placing the stand
Place the stand as shown.
Subwoofer
SUBWOOFER SYSTEM
Right
Left
White
●
Do not make a mistake when
connecting
speakers. The right speaker is the
one on the right side when you face
the unit.
●
Do not let the bare speaker wires
touch each other.
●
Do not allow any objects to fall into or
to be placed in the bass reflex duct.
●
Do not stand or sit on this system. You may be injured.
E-10
Amplifier
Stand
L
Sound Bar
AC outlet
AC 120 V ~ 60 Hz
Amplifier
the right and left
Stand
INCORRECT