Replacing The Batteries - Epson PowerLite 1810p User Manual

caution
When replacing batteries,
take the following
precautions:
■ Replace the batteries as
soon as they run out. If the
batteries leak, wipe away
battery fluid with a soft
cloth. If fluid gets on your
hands, wash immediately.
■
Do not expose batteries to
heat or flame.
■
Dispose of used batteries
according to local
regulations.
■ Remove the batteries if
you won't be using the
projector for a long period of
time.
Maintaining the Projector
70
The life span of the lamp is about 2500 hours if the
setting in the Settings menu is set to
Control
3000 hours if the
Brightness Control
sure you have a spare lamp handy if the usage hours on this menu
are close to the life span of your lamp.

Replacing the Batteries

Replace the batteries in the remote control as described below:
1. Turn the remote control over.
2. Press down on the tab on the
battery cover as you lift the cover
off.
3. Install two AAA batteries,
inserting the and
+
shown.
4. Position the cover as shown, then
press down until it snaps into
place.
High
setting is set to
ends as
–
Brightness
(default), and
. Make
Low