Epson PowerLite 1810p User Manual page 56

note
Network Protect is not
available for the 1810p
projector.
Hold down
Fine-Tuning the Projector
56
You see this screen:
2. Use the pointer button to select
3. When you see a message asking if you want to change the
password, select
Yes
4. Hold down the
Num
the numeric keypad to enter a four digit password. (The default
setting is 0000.)
5. When you see a confirmation message, reenter the password.
Then press the
Menu
To set security options, access the Password Protect screen as
described above, and then turn on any of the following options:
■
Power On Protect
After the projector is plugged in and turned on, you must enter a
password to use the projector. For details, see page 57.
■
User's Logo Protect
settings from being changed. None of the User's Logo features in
the Extended menu can be changed when the User's Logo Protect
function is enabled. For details on creating a custom screen, see
page 57.
■
Password
and press .
Enter
button on the remote control and use
button to exit the screen.
to prevent unauthorized use of the projector.
to prevent your custom screen and display
and press .
Enter