Epson PowerLite 1810p User Manual page 16

note
You can set the projector to
automatically turn off the
projector lamp and enter
"sleep mode" when it has
not received any signals for
30 minutes. This conserves
electricity, cools the
projector, and extends the
life of the lamp. If you want
to start projecting again,
press the P button.
Power
If you are done using the
projector, unplug the power
cord. To enable sleep mode,
see page 60.
Displaying and Adjusting the Image
16
Follow these steps to turn on the projector:
1. Open the A/V mute slide (lens cover).
2. Plug one end of the power cable into the projector, and the other
end into an electrical outlet.
The light turns orange.
Power
Power light