Transferring External; Other Handsets; Memory; Toring Aame And - GE 21018 User Manual

3. When the receiving handset connects, press the FORMAT/CONF button
on the originating handset to conference with the receiving handset and
the external caller. CONFERENCE shows in the display on the
originating and receiving handsets.
NOTE: A handset can enter conference mode directly by pressing TALK/
END/CALLBACK on the second handset during a call.
T
RANSFERRING
During an external call, you may transfer the external call to another handset.
1. Press the PAGE/INT button on the originating handset to put an external
call on hold, and then page the receiving handset.
2. Use the touch-tone pad on the handset to select Handset 1 or Handset 2.
You will hear a paging tone. PAGING shows on the originating handset's
display, and PAGING FROM . . . shows on the receiving handset's display.
3. When the receiving handset connects, press the TALK/END/CALLBACK
button on the originating handset to transfer the call.
-OR-
4. Press the TALK/END/CALLBACK button on the originating handset to
transfer the call. If the receiving handset does not answer within 30
seconds, the originating handset rings back and displays CALLBACK. If
the originating handset does not answer within 20 seconds, the call is
automatically dropped.
M
EMORY
You may store fifty 15-character names and 20-digit telephone numbers in
the handset memory.
S N
TORING A AME AND
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM key to display SELECT MEMORY 01-50.
3. Press the desired memory location button (01 through 50) or use the
CID/VOL (/\ or V) button to scroll to desired the memory location.
NOTE: If the memory location is occupied, the memory location number and
stored name and telephone number appear in the display. If the memory
location is empty, EMPTY appears in the display.
26
E C
XTERNAL ALLS TO
N
UMBER IN
O H
THER ANDSETS
M
EMORY