Toring The Inserting A Pause In The; Sequence - GE 21018 User Manual

4. Press the MEM key. The display shows ENTER NAME.
5. Use the touch-tone pad to enter a name (up to 15 characters). More than
one letter is stored in each of the number keys. For example, to enter Bill
Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the
letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for
the second letter L, and press the 1 key to insert a space between the first
and last name. Press the 7 key 4 times for the letter S; press the 6 key once
for the letter M; press the 4 key 3 times for the letter I; press the 8 key for
the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake press the DEL button to backspace and erase
the wrong character(s) or number(s).
6. Press the MEM key to confirm and save the record. The display shows
ENTER TEL NUMBR.
7. Use the touch-tone pad to enter the telephone number (up to 20 digits,
including pauses (press #PAUSE button)), and press the MEM key again
to save the record. The unit beeps to confirm.
NOTE: The system treats PAUSES as delays or spaces in the dialing sequence.
8. To enter another name and number in a different memory location,
return to step 2 and repeat the process.
S L
TORING THE
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press the REDIAL button on the handset.
3. Press the MEM button to save. You will hear a confirmation tone.
NOTE: If the redial number has more than 20 digits, it cannot be stored in memory.
I P
NSERTING A AUSE IN THE
Press the # button on the handset's touch-tone pad to insert a delay in
dialing sequence when a pause is needed to wait for a dial tone (for
example, after you dial 9 for an outside line, or to wait for a computer
access tone.) Each pause counts as one digit in the dialing sequence.
N D
AST UMBER
D
IALING
IALED
S (
EQUENCE
S N
OF A TORED
)
UMBER
27