Vip M - GE 21018 User Manual

VIP M

ELODY
This features allow you to assign a specific melody to someone you want
to get your attention when the person calls. When a VIP melody is
assigned and that person calls, the unit rings the normal ring for the first
ring and then follows with VIP melody ring. You may choose from ten
different polyphonic melodies and may store up to 10 VIP records.
NOTE: This feature only works when the following conditions are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record transferred to the memory. (Refer to Storing
CID Records in Internal Memory).
S VIP M
TORING
1. With handset in standby mode.
2. Press MUTE/PROG button once to display the submenus; ROOM
MONITOR and HANDSET SETUP .
3. Press the CID/VOL (/\ or V) button to scroll to the HANDSET SETUP.
4. Press MUTE/PROG button to enter into this HANDSET SETUP.
5. Press the CID/VOL (/\ or V) button to scroll to VIP MELODY submenu.
6. Press MUTE/PROG button to select VIP melody feature and then
display VIP 1 record.
- If VIP1 does NOT contain any specific number/records, it shall
display EMPTY.
7. Press CID/VOL (/\ or V) button to select the specific VIP melody
memory location (10 VIP locations) that does not contain any record.
8. Press MUTE/PROG button to display SELECT MEMORY.
9. Press CID/VOL (/\ or V) button to view the records from memory to be
selected as VIP.
10. Press MUTE/PROG button to confirm and then display VIP MELODY
01 to wait for the melody tone selection
11. Press CID/VOL (/\ or V) button to select from melody 01 to melody 10
(a testing tone is generated while making melody selection)
12. Press MUTE/PROG button to confirm.
16
ELODY