Related Manuals for LG LCZ3750-DN
Summary of Contents for LG LCZ3750-DN
- Page 1 OWNER'S MANUAL Color Video Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LCZ3750-DN / LCZ3750-DP LCZ3750 series...
- Page 2 FCC WARNING: This equipment may generate or use radio CAUTION frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction RISK OF ELECTRIC SHOCK manual. The user could lose the authority to operate this DO NOT OPEN equipment if an unauthorized change or modification is made.
- Page 3 Caution • Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent • This installation should be made by a qualified service type recommended by the manufacturer. Dispose person and should conform to all local codes. of used batteries according to the manufacturer’s •...
- Page 4 LG Electronics hereby declares that this/ Disposal of your old appliance these product(s) is/are in compliance with the essential requirements and other relevant When this crossed-out wheeled bin provisions of Directive 2004/108/EC, 2006/95/ symbol is attached to a product it means EC, and 2009/125/EC.
-
Page 5: Important Safety Instructions
Important Safety Instructions Read these instructions. and the point where they exit from the apparatus. Keep these instructions. 11. Only use attachments/accessories specified by the manufacturer. Heed all warnings. 12. Use only with the cart, stand, tripod, bracket, or Follow all instructions. table specified by the manufacturer, or sold with the Do not use this apparatus near water. -
Page 6: Cautions For Safe Operation
Cautions for Safe Operation Power Supply Operating and storage location This camera must always be operated a DC 12 V Certified/ Avoid viewing a very bright object (such as light fittings) Listed, class 2 power supply only. during an extended period. Avoid operating or storing the unit in the following locations. -
Page 7: Table Of Contents
Contents Features ..............8 Day/Night setting ............26 Motion Detection setting ..........27 Part Names and Functions ........9 Privacy Mask setting ............28 3D-DNR setting ..............29 Connections ............12 Special menu settings ..........30 Reset settings ..............32 Power connection............12 Connecting Monitor ............12 Reference ............33 Connecting RS-485 Controller .........13 On Screen Display ............33 Alarm Connection ............13... -
Page 8: Features
Features This color video camera is designed for use in monitoring system. • High resolution and high sensitivity with a 4.5 mm (1/4 Type) Super HAD CCD II. • High magnitude of zoom lens with optical x37, Digital x12 (Maximum x444) •... -
Page 9: Part Names And Functions
Part Names and Functions a Lens mount cap The cap is installed to protect the lens mount section. Remove the lens mount cap before install the camera. (sold separately) b Camera installation bracket The bracket can be fixed at the top or bottom of the camera. - Page 10 Part Names and Functions Control buttons • T(TELE) button When push, picture is telephoto. • N(NEAR) button In a manual situation, focus get near. • M(MENU) button. If you want to set up a diverse function, you can push this button. •...
- Page 11 Part Names and Functions External Device Connectors • TRX -/+ Connect to an external controller of RS-485 format. • Common GND. • Alarm Output Terminal (ALARM) Connect to the alarm input of an external device. • COM (Common) • OSD/D&N OSD: Connect the external controller to control the OSD function manually.
-
Page 12: Connections
Connections Power connection Connecting Monitor Remove the insulation on the power cable as The video signal connection between the camera and the illustrated. monitor or DVR. Attach the terminal tips. Connect to the 12V 1 UL Listed, Class 2 Power Supply only on the camera. -
Page 13: Connecting Rs-485 Controller
Connections Connecting RS-485 Controller Connect to an external controller of RS-485 format. TRX - RS-485 Controller TRX + Contact Ratings 5~7 mm • Maximum load current is ±130mA. • Do not connect any system or device that has over 40 Vp-p (DC 30 V) bias voltage on the contact terminal. -
Page 14: Day&Night Function Settings
Connections Day&Night function settings OSD function settings If you set the DAY/NIGHT option to EXT on the [CAMERA When you connect the "-5V" signal to the OSD/D&N SET] menu, you can set the D&N function manually. terminal, the menu is displayed or the sub menu is displayed or the selected menu option is activated In case that current D&N mode is set to Day mode according to current conditions. -
Page 15: Focus And Zoom Function Settings
COMMON FOCUS (+: Near, -: Far) Connections FOCUS and ZOOM Function Settings ZOOM function You can set the FOCUS and ZOOM function manually. Using the external controller or receiver unit to control the FOCUS and ZOOM functions. FOCUS function COMMON ZOOM (+: Tele, -: Wide) COMMON FOCUS (+: Near, -: Far) -
Page 16: Installation Of Camera
Installation of Camera The bracket can be installed to either the top of the camera as desired. When changing the position of the camera mounting bracket, you should always reuse the screws that have been removed. Note: If using a camera mounting bracket, select a location that is strong enough to bear the full weight of the camera and the mounting bracket for long periods, and install the camera and mounting bracket securely. -
Page 17: Menu Operation
Menu Operation Menu Operation The following table shows the list of menu items and Main Menu Sub Menu Contents options. You can adapt the camera to your requirements by AUTO ONE PUSH setting up the respective items in these menus. INDOOR, COLOR TEMP OUTDOOR... - Page 18 Menu Operation Main Menu Sub Menu Contents Main Menu Sub Menu Contents SMART MD OFF / ON MASK MASK1 to MASK8 NUMBER ZONE ZONE1 to NUMBER ZONE4 MASK OFF / ON STATE ZONE ON, OFF STATE RED, GREEN, 0 to 255 BLUE WIDTH 2 to 8...
-
Page 19: General Operation
RESET REBOOT Select [EXIT] option then press [M] to exit the setup PROTOCOL LG / PELCO-D / PELCO-P menu. In the submenu, use [T] or [W] button to select EXIT RET / TOP / END the [EXIT] then use [N] or [F] button to select a mode... -
Page 20: Focus Settings
Menu Operation Focus settings and press [M] to exit the setup menu. • RET: Return to the previous. • TOP: Return to the CAMERA SETTING menu screen. • END: Exit the setup menu. Notes: • [T] button: Use to move upper direction on the menu screen. - Page 21 Menu Operation • AUTO: Auto-focus is activated automatically. ZOOM END setting • ONE PUSH: The focus is activated manually. If You can set the zoom end position of the camera. If you the camera is received auto-focus command, the set the zoom end position, the zoom is operated up to the camera is activated Auto-focus mode and the focus selected zoom end position.
-
Page 22: Exposure Settings
Menu Operation Exposure Settings AGC (Automatic Gain Control) setting If the images are too dark, change the maximum [AGC] value to make the images lighter. Select [AGC] option on the [EXPOSURE] menu. Use [N] or [F] button to select a value. WDR/BLC setting Use WDR/BLC option to set the options for BLC or WDR camera. - Page 23 Menu Operation • BLC: Camera’s backlight compensation feature helps BRIGHTNESS setting alleviate issues of visibility in high contrast areas. Set You can increase the brightness of the darkened video. the BLC limit. If you set the brightness to lower value, the image is •...
-
Page 24: White Balance Setting
Menu Operation White Balance setting SENS-UP setting If pictures are not clear due to darkness, use for increase the Select the method by which the camera shifts its output sensitivity of picture. colors to compensate for the color of a light source. Select [SENS-UP] option on the [EXPOSURE] menu. - Page 25 Menu Operation When the scene contains mostly high color is approximately 1 800 K to 10 500 K. Proper white temperature objects, such as a blue sky or sunset. balance may not be obtained under the following conditions: When the scene is dim. When the color temperature is out of the 1 800 K •...
-
Page 26: Day/Night Setting
Menu Operation Day/Night setting DWELL TIME: Use [N] or [F] button to select a dwell time. BURST MODE: Select [ON] or [OFF] to set the color burst in Night status. • DAY: Color mode enabled. • NIGHT: Black-and-white mode enabled. •... -
Page 27: Motion Detection Setting
Menu Operation Motion Detection setting Use [N] or [F] button to select a zone number on the [ZONE NUMBER]. The motion detection detects the moving objects in the Use [N] or [F] button to set up the ON or OFF on scene by monitoring changes in brightness level. -
Page 28: Privacy Mask Setting
Menu Operation Privacy Mask setting on the monitor. Select [RESET MASK] and press [M]. If you register the mask zone for the first time, the mask zone box appears on the center of the monitor. If you already registered mask zone, it will be returned to its initial state and appear on the center of the monitor. -
Page 29: 3D-Dnr Setting
Menu Operation 3D-DNR setting Notes: • If you want to reset the mask zone position, select RESET MASK option and press [M] button. • The parts with the registered mask numbers from MASK1 to MASK4 have the same color. (So do the parts with the numbers from MASK5 to MASK8). -
Page 30: Special Menu Settings
Menu Operation Special menu settings D-EFFECT (Digital effect) setting You can select the digital effect. Select [D-EFFECT] option on the [SPECIAL] menu. Use [N] or [F] button to select a digital effect. • MIRROR: Turn on the mirror effect. • V-FLIP: Flip the picture vertically. - Page 31 Menu Operation Freeze setting OSD setting Select [FREEZE] option on the [SPECIAL] menu. You can set the Function On-Screen Display options using the [OSD] menu. The Function On-Screen Display of this Use [N] or [F] button to set up the ON or OFF. camera can be turned on or off.
-
Page 32: Reset Settings
> : Moves cursor to left or right. • PROTOCOL: Select the protocol for the camera Language setting communication among the LG, PELCO-D and PELCO-P. Select a language for setup menu and information display. Press [M] to confirm your selection. -
Page 33: Reference
TITLE TITLE Reference Reference On Screen Display Function Description Format Some of these functions will be displayed every time the None Display Zoom Trigger Mode camera is operated. Auto Mode b c d e f g i j k l Focus Mode Manual Mode... - Page 34 TITLE TITLE Reference Function Description Function Description Format Format None Display Auto or ATW Mode None Display 3D-DNR is turned off. 3D-DNR White Manual Mode 3D-DNR is turned on. Balance Mode Text: A to Z, One Push Mode User Title User Title 0 to 9, ‘-’...
- Page 35 Reference Function Description Format None Display Color On Color On/ Color Off Status None Display Freeze Off Freeze On/Off Freeze On Status Motion Displays when the Detection motion is detected. Status Zoom Optical Zoom: 37X, X1 to X444 Display Digital Zoom: 12X...
-
Page 36: Rs-485 Protocol (Optional)
Reference RS-485 Protocol (Optional) Data Communication Format • Data Length: 1 Byte (8 Bit) • Start/Stop Bit: 1 Bit • Parity Bit: None • Baud rate: 9,600 bps Format Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Key In or 0xE5... - Page 37 Reference Commands Function Command Description OSD On Key Action Key In E5 87 ID 60 00 14 CS Menu When OSD is being displayed, Enter into the Key Out E5 87 ID 60 FF 14 CS submenu or execute the menu item. Menu Defined Speed Tele Key Action Key In E5 87 ID 60 00 08 CS...
-
Page 38: Specifications
Reference Specifications ITEM LCZ3750-DN LCZ3750-DP Signal System NTSC Total Pixels Number 520 000 Pixels 610 000 Pixels Effective Pixels Number 480 000 Pixels 570 000 Pixels Image Device 4.5 mm (1/4 Type) Super HAD CCD II XDI-II Lens x37 Zoom, F 1.5 (Wide End), F 4.1 (Tele End), f = 3.5 mm to 129.5 mm... - Page 39 Reference ITEM LCZ3750-DN LCZ3750-DP S/N Ratio 50 dB (AGC Off ) 0.01 lx (Sens-up OFF), 0.000 01 lx (Sens-up ON) Minimum Illumination (30 IRE) Color 0.2 lx (Sens-up OFF), 0.003 lx (Sens-up ON) Video Output Signal 1 Vp-p Composite (75 Ω) Day &...
- Page 40 Reference ITEM LCZ3750-DN LCZ3750-DP Operation Temperature -10 ºC to 50 ºC Storage Temperature -20 ºC to 60 ºC Operation Humidity 0 % RH to 80 % RH Storage Humidity 0 % RH to 90 % RH Weight 520 g Dimension (H x V x D)
Need help?
Do you have a question about the LCZ3750-DN and is the answer not in the manual?
Questions and answers