Also See for L5213R-BN
Installation manual
- 2 pages
Also See for LG L5213R-BN
LG L5213R-BN Installation Manual
2 pages
Related Manuals for LG L5213R-BN
-
Camcorder LG L5223 Series Owner's Manual
(36 pages)
-
Camcorder LG L5223-BN Series Owner's Manual
Color video camera (2 pages)
-
Camcorder LG LVC Operating Instructions Manual
Lg color video camera operating instructions (28 pages)
-
Camcorder LG LE2104 Owner's Manual
Digital video recorder (72 pages)
-
Camcorder LG LS903 Instruction Manual
(42 pages)
-
Camcorder LG LS300N-D1 Instruction Manual
Color video camera (15 pages)
-
Camcorder LG LV300N-B Instruction Manual
(17 pages)
-
Camcorder LG L320-BP Owner's Manual
Color video camera (2 pages)
-
Camcorder LG LV300N-B Color Video Camera
Color video camera (17 pages)
-
Camcorder LG LVC-SX811HM Instruction Manual
(23 pages)
-
Camcorder LG LV821 User Manual
Color video camera (40 pages)
-
Camcorder lg L332-BN Owner's Manual
Color video camera (44 pages)
-
Camcorder LG LVC-SX701PC Instruction Manual
Color video camera (40 pages)
-
Camcorder LG LCB5100-BN Owner's Manual
Color video camera (36 pages)
Summary of Contents for LG L5213R-BN
- Page 1 OWNER’S MANUAL Color Video Camera Please read this manual carefully before operating your set and retain it for future reference. MODELS L5213R-BN L5213R-BP L5213R-DN...
- Page 2 FCC WARNING: This equipment may generate or use radio CAUTION frequency energy. Changes or modifications to this equip- ment may cause harmful interference unless the modifica- RISK OF ELECTRIC SHOCK tions are expressly approved in the instruction manual. The DO NOT OPEN user could lose the authority to operate this equipment if an unauthorized change or modification is made.
- Page 3 • Caution: Danger of explosion if battery is incorrectly re Caution: This installation should be made by a qualified placed. Replaced only with the same or equivalent type service person and should conform to all local codes. recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
- Page 4 Disposal of your old appliance LG Electronics hereby declares that this/ these product(s) is/are in compliance with the essential 1. When this crossed-out wheeled bin requirements and other relevant provisions symbol is attached to a product it means the of Directive 00/108/EC, 006/95/EC, and product is covered by the European Directive 009/15/EC.
-
Page 5: Important Safety Instructions
Important Safety Instructions Read these instructions. 11. Only use attachments/accessories specified by the Keep these instructions. manufacturer. Heed all warnings. 1. Use only with the cart, stand, tripod, bracket, or table Follow all instructions. specified by the manufacturer, or sold with the ap- Do not use this apparatus near water. -
Page 6: Cautions For Safe Operation
Avoid the use of volatile solvents such as thinners, alcohol, benzene and insecticides. They may damage the L5213R-BP/L5213R-BN: surface finish and/or impair the operation of the camera. This camera must always be operated a AC V or DC 1 V Operating and storage location Certified/Listed, class power supply only. -
Page 7: Table Of Contents
Contents Features ................. 8 ................ Day/Night Setting Part Names and Functions ........... 9 ................5 Privacy Setting Connections ................ 10 Special Menu Settings ............... 6 ................10 ............7 Basic connection LANGUAGE Setting Installation ................. 11 ..........7 Setting the COLOR EFFECT ........11 ......... -
Page 8: Features
Features Accessories This Color Video Camera is designed for installation in an indoor video surveillance system. This manual contains instructions on how to install and man- age the Color Video Camera in your video surveillance system. DOME CAMERA Should you require any technical assistance, please contact authorized service center. -
Page 9: Part Names And Functions
Part Names and Functions - Dome Cover - Photo Cell - LED(30ea) - Video Output Jack - Power Input Jack Supplies AC V or DC 1 V from an external power source. - LED Cover - OSD Setup Switch - Service Video Connector Use this jack for checking the picture with portable monitor when... -
Page 10: Connections
Connections Basic connection The peripheral devices (DVR, monitor, etc.), AC/DC adapter and cables are not supplied. DUAL(DC1V/ACV) DC1V DC12V /AC24V POWER SUPPLY DC12V POWER SUPPLY DC12V/AC24V DC12V VIDEO IN BNC FEMALE BNC FEMALE VIDEO IN... -
Page 11: Installation
Installation Installing the camera on a ceiling or wall . Affix the mounting template(supplied) to the mounting surface. . Secure the camera mounting bracket to the position where the camera should be mounted with the supplied screws. Template Tapping Type ø2x7mmx1ea (Supplied) Tapping Type ø4x20mmx3ea... - Page 12 Installation . Adjust the camera lens to face the area to be monitored and fix the main body and the dome cover by aligning the grooves and rotating the body clockwise.
-
Page 13: Adjustment
Installation Adjustment Having a better view , adjust the camera • Rotate angle : 60˚ Service Video connector • Panning angle : 60˚ Connect a portable monitor to the video jack. • Tilting angle : 90˚ (Viewable operation tilt angle 60˚~65˚) ROTATE 360˚... - Page 14 Installation Focus: Far ← → Near Follow the instruction provided below Zoom: Tele ← → Wide to make any lens adjustments • Loosen the Zoom & Focus screws. • Using the screw, move it LEFT or RIGHT to the desired position. •...
-
Page 15: Menu Operation
Menu Operation This camera utilizes an on-screen user MENU. • To set items on the menu, use the following switch. Used to move upper direction on the menu screen. Use this button to select an item or adjust the parameters. DOWN •... -
Page 16: Osd Menu Overview
Menu Operation OSD Menu Overview Main Menu Sub Menu Contents STANDARD The following table shows the list of menu items and options. VIVID USER MODE You can adapt the camera to your requirements by setting up the WARM respective items in these menus. COOL USER TITLE AWC →... - Page 17 Menu Operation Main Menu Sub Menu Contents Main Menu Sub Menu Contents ENG/CHN/KOR/JAP/FRE/ITA/SPA/POR/ LANGUAGE MASK NUMBER AREA1 to AREA8 DUT/GER/POL/RUS/TUR/ARA/HEB DISPLAY SET ON/OFF COLOR EFFECT OFF/ ON GRAY/ WHITE/ SHARPNESS 0 to 68 COLOR SET PRIVACY BLACK STABILIZER OFF/ ON HEIGHT to 100 WIDTH...
-
Page 18: General Operation
Menu Operation General Operation Setting the USER TITLE 1. Press [SET] button. You can use the camera identification to assign a number and character The setup menu screen appears on the monitor. to the camera (0 to 9, A to Z, a to z). The USER TITLE is displayed on the upper left of the screen. -
Page 19: Exposure Settings
Menu Operation • END: Confirm your selection or exit the setting • (Blank): Inserts a space at the cursor position. • : Moves cursor to left or right. ← → Exposure Settings You can set the exposure options using the EXPOSURE menu. 1. - Page 20 Menu Operation . Use [LEFT] or [RIGHT] button to select a mode then press [SET]. • OFF: Not used. BACKLIGHT setting • BLC: Camera's backlight compensation feature helps alleviate issues of visibility in high contrast areas. You can increase the brightness of the darkened video. If you set the Set the BLC limit.
-
Page 21: Agc (Automatic Gain Control) Setting
Menu Operation AGC (Automatic Gain Control) setting SHUTTER (Shutter Speed) setting If the images are too dark, change the maximum [AGC] Select the desired shutter speed for camera exposure. You can change value to make the images brighter. the shutter speed to higher speed to capture fast-moving subjects, though the image becomes darker. -
Page 22: Sens-Up Setting
Menu Operation SENS-UP setting Note: If pictures are not clear due to darkness, this SENS-UP If you set to one of the SHUTTER options except AUTO on the [SHUTTER] operation would increase the sensitivity of picture. menu or [AGC] to [OFF], the [SENS-UP] setting is not available and [---] mark is displayed. - Page 23 Menu Operation • ATW (Auto-Tracing White Balance): Use [LEFT] or [RIGHT] button - INDOOR: The color temperature range for the proper to select the ATW then press [SET] button. white balance is approximately 00 K. You can select the USER MODE. (STANDARD - VIVID - WARM - COOL) - OUTDOOR: The color temperature range for the proper white balance is approximately 5 100 K.
-
Page 24: Day/Night Setting
Menu Operation 3D-DNR Setting Day/Night Setting 1. Select [D-DNR] option. 1. Select [DAY/NIGHT] option. If pictures are not clear due to brightness, this option would reduce . Use [LEFT] or [RIGHT] button to select mode for day/night function. the noise of picture. •... -
Page 25: Privacy Setting
Menu Operation Privacy Setting > LEVEL: Use [LEFT] or [RIGHT] button to select a level. (LOW MIDDLE HIGH) ↔ ↔ This function is aiming at the protection of personal privacy, selecting a screen part black not to be displayed in the screen. Up to 8 >... -
Page 26: Special Menu Settings
Menu Operation 5. Use [LEFT] or [RIGHT] button to set up the GRAY, Special Menu Settings WHITE or BLACK on the COLOR SET option. This menu lets you adjust and set up LANGUAGE, COLOR EFFECT, SHARPNESS, STABILIZER, D-ZOOM, D-EFFECT, MOTION DET, FACTORY 6. -
Page 27: Language Setting
Menu Operation Setting the COLOR EFFECT LANGUAGE Setting You can switch the displayed picture to gray scale or color. Select the viewer language for the camera setup menu and OSD information display. 1. Select [COLOR EFFECT] option on the [SPECIAL] menu. . -
Page 28: Setting The Sharpness Effect
Menu Operation Setting the SHARPNESS effect STABILIZER setting The degree to which the boundary of the two portions is clearly distinguished. 1. Select [SHARPNESS] option on the [SPECIAL] menu. The image stabilizer function minimizes the appearance of shaky im- . Use [LEFT] or [RIGHT] button to change a adjust the option. ages caused by low-frequency vibration. -
Page 29: Setting The D-Zoom (Digital Zoom ) Leve
Menu Operation Setting the D-EFFECT (Digital effect) Setting the D-ZOOM (Digital Zoom ) level You can select the digital effect. You can select the digital zoom level. 1. Select [D-EFFECT] option on the [SPECIAL] menu. 1. Select [D-ZOOM] option on the [SPECIAL] menu. . -
Page 30: Motion Detection Setting
Menu Operation Motion Detection Setting 5. Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option. The motion detection detects the moving objects in the scene by moni- toring changes in brightness level. You can select the level of sensitivity •... -
Page 31: Factory Reset Setting
Menu Operation Factory Reset Setting • FACTORY RESET: To reset the camera setting to factory setting, select [FACTORY RESET] option. -
Page 32: Specification
Specification Model L5213R–BP L5213R-BN/DN Signal System NTSC Total Pixels No. / 70K / 0K 10K / 80K Effective Pixels No. Image Device 1/" CCD (ICX68/69BK) XDI-S Lens .8~11mm Vari-focal lens Digital Zoom Sync. System Internal Scanning Frequency (H/V) 15.65 KHz / 50 Hz 15.7 KHz / 59.9 Hz... - Page 33 Specification Electronic Shutter Speed 1/50 ~1/90,000 1/60 ~1/90,000 Electronic Sensitivity OFF/Auto ( x, x, x,…..x 18 ) Auto / ATW / One Push / Manual White Balance (1,700ºk ~ 11,000ºk) Motion Detection Zones Privacy Zone Masking 8 Masks Stabilizer(EIS) On / Off User Color Mode Standard / Cool / Warm / Vivid...