Half-duplex mode
The Talk/Listen button is used to switch between sending and receiving audio. The button can be config-
ured from the Audio tab in the AMC Control panel:
•
Push-To-Talk mode: Click and hold the button to talk/send, release the button to listen.
•
Toggle mode: Click once to switch between talking and listening.
Simplex – Network Video Encoder speaker only mode
To send audio, the Talk and Microphone buttons must both be enabled. Click either button to stop audio
transmission.
Pan/Tilt/Zoom controls
For information about pan, tilt and zoom controls, see PTZ controls, on page 25.
AXIS Q7414 - Accessing the video encoder blade
10