6.2B.2. INSTALL THE FILTER
• Install the filters (Accessories) to the unit.
AR9/12/18: 2 filters
AR24: 3 filters
Unit
Replace drain cap
CAUTION
• Set "10.4. Jumper wire setting of Drainage function setting
(JM1)".
• Drain pump cannot be used if it is installed in wall mounted
type/floor standing concealed type.
Filter
Filter
6.2B.3. INSTALLING THE UNIT
• To prevent overturning, attach the unit to the floor or the
wall.
• To avoid vibration of the unit, install vibration isolation pad
between the unit and the floor or the wall.
Leveling
Level unit before attaching to floor or wall.
Level
OK
Level
OK
CAUTION
Fasten the unit securely with Special nuts A and B.
NO GOOD
NO GOOD
En-11