D-Link DSL-2730U User Manual page 54

4.4.6.2 Outbound IP Filtering
By default, all outgoing IP traffic from the LAN is allowed. The outbound filter
allows you to create a filter rule to block outgoing IP traffic by specifying a filter
name and at least one condition.
In the Filtering Options page, click Outbound IP Filtering. The page shown in
the following figure appears.
Click Add to add an outbound IP filter. The page shown in the following figure
appears.
Enter the Filter Name and specify at least one of the following criteria: protocol,
source/destination IP address, subnet mask, and source/destination port. Click
Apply to save the settings.
The ACTIVE OUTGOING IP FILTER shows detailed information about each
created outbound IP filter.
DSL-2730U User Manual
51