D-Link DSL-2730U User Manual page 14

Set the time and date.
First NTP time server: Select the domain of the time server to which system
time will be synchronized.
Configure the Internet connection.
Select the country and ISP. Set the VPI and VCI. If you fail to find the country
and ISP from the drop-down lists, select Others.
 Protocol: The protocol connection type of the interface. You can select
PPPoE, PPPoA, Dynamic IP, Static IP, or Bridge.
 Connection Type: You can select it from the drop-down list according to the
uplink equipment. You can select LLC or VC-Mux.
 VPI: The virtual path identifier of the WAN interface (provided by your ISP).
The range is 0 to 255.
 VCI: The virtual channel identifier for the WAN interface. The range is 32 to
65535 (1 to 31 are reserved for known protocols).
DSL-2730U User Manual
11