D-Link DSL-2730U User Manual page 39


Transmit Power: Adjust the transmission range here. This tool can be
helpful for security purposes if you wish to limit the transmission range.

WMM (Wi-Fi Multimedia): Select whether WMM is enable or disabled.
Before you disable WMM, you should understand that all QoS queues or
traffic classes related to wireless do not take effect.

Enable Wireless: Select this to turn Wi-Fi on and off.

Wireless Network Name (SSID): The Wireless Network Name is a
unique name that identifies a network. All devices on a network must
share the same wireless network name in order to communicate on the
network. If you decide to change the wireless network name from the
default setting, enter your new wireless network name in this field.

Visibility Status: You can select Visible or Invisible.

User Isolation: When many clients connect to the same access point,
they can access each other. If you want to disable the access between
clients which connect the same access point, you can select On to
enable this service.

Disable WMM Advertise: You can select On or Off from the drop-down
list.

Enable Wireless Multicast Forwarding (WMF
Off from the drop-down list.

Max Clients: Specifies maximum wireless client stations to be enble to
link with AP.

GUEST/VIRTUAL ACCESS POINT: If you want to make Guest/Virtual
network function be available, you can set the parameters below.
These settings are only for more technically advanced users who have
sufficient knowledge about wireless LAN. Do not change these settings
unless you know the effect of changes on the device.
Click Apply to save the settings.
DSL-2730U User Manual
): You can select On or
36