D-Link DSL-2730U User Manual page 37

4.4.1.1 Wireless Basics
In the Wireless Settings page, click Wireless Basic, the page shown in
the following figure appears. In this page, you can configure the
parameters of wireless LAN clients that may connect to the device.

Enable Wireless: Select this to turn Wi-Fi on and off.

Wireless Network Name (SSID): The Wireless Network Name is a
unique name that identifies a network. All devices on a network
must share the same wireless network name in order to
communicate on the network. If you decide to change the wireless
network name from the default setting, enter your new wireless
network name in this field.

Visibility Status: You can select Visible or Invisible.

Country: Select the country from the drop-down list.

Wireless Channel: Select the wireless channel from the pull-down
menu. It is different for different countries.

802.11 Mode: Select the appropriate 802.11 mode based on the
wireless clients in your network. The drop-down menu options are
802.11n auto, 802.11g only, Mixed 802.11g and 802.11b, or 802.11b
only.

Bandwidth You can select it from the drop-down list:
:
Click Apply to save the settings.
DSL-2730U User Manual
34