Table of Contents
Advertisement
PPP (Dial-up) Settings
3
2
Set "CONNECT" to "N".
3
Click the [CAMERA SET] and [RECORD
MODE SET] buttons and make the
respective settings.
4
Click the [LOCAL SERVER SET] button.
The LOCAL SERVER SET screen will be
displayed.
•
LOCAL SERVER USE: Set to "USE".
•
LOCAL SERVER IP ADDRESS:
Obtain the global IP address from the
Internet service provider and type that in.
•
FTP PORT NUMBER: Type in "21".
•
FTP PASSIVE: Set to "NO USE".
•
CAMERA-ID: Type in a unique
4-character camera name.
English
5
5
Click the [SET TO CAMERA] button.
The settings will be loaded into the video
server.
6
Click the [SAVE INFO FILE] button.
The settings will be applied to the Network
Archiving Software.
7
Close the Camset window.
Note:
•
The video server cannot be accessed using
the computer's web browser while the video
server is connected to the modem. Use a
wired LAN or wireless LAN to access the
video server.
•
Only alarm image data and alarm data can
be transmitted by means of PPP connections.
– 49 –
2
4
6
Advertisement
Table of Contents
