Accessories; Features - Sanyo VSP-SV2000P Instruction Manual

Accessories

1
Setup CD-ROM . . . . . . . . . . . . . . . . . . . 1 pc.
2
AC Adaptor . . . . . . . . . . . . . . . . . . . . . . . 1 pc.
3
Plastic tie . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.
4
Ferrite core . . . . . . . . . . . . . . . . . . . . . . . 3 pc.
1
3
English
2
4

Features

Web Server Function
This video server is equipped with a web server
function. The video server can be accessed
using a computer's web browser in order to view
images for up to four input signals (4 screen split
screen). In addition, up to a maximum of 16
users can simultaneously access a single video
server on the network.
Network Connections
This video server is equipped with both an
Ethernet connector and an RS-232C connector,
allowing it to be connected to a variety of
different network environments, such as LANs
and the Internet.
Wireless LAN Compatibility
The video server can also be used in a wireless
LAN environment by installing the specified
wireless LAN card.
Adoption of JPEG2000
The images captured by the video server are
compressed using the JPEG2000 format before
transmission. In comparison to conventional
JPEG formats, this format produces very little
image deterioration and allows large volumes of
data to be transmitted quickly (maximum 30 fps).
Note: The transmission rate will vary depending
on individual network conditions.
A network environment that can transmit
data at high speeds is required in order to
transmit data at 30 fps.
Alarm Recording and Playback Functions
The built-in motion sensor detects movement,
and the video server can also be connected to
an external alarm sensor that is set to detect
abnormalities, so that images can be recorded
and played back when an alarm occurs.
Communication function (RS-485)
Communication output via SSP (Sanyo Security
Protocol) (using the RS-485 connector) allows
the video server to be controlled by other
devices such as cameras and multiplexers by
remote control.
– 3 –