Network Set Settings - Sanyo VSP-SV2000P Instruction Manual

Network Video Server (Wired LAN) Settings

3 NETWORK SET Settings

These settings are used in order to connect the video server to the network. After these settings have
been completed, you may also have to make wireless LAN settings or PPP settings. More than one
video server can be connected to the same network, but in order to do this, you will need to make
settings for each video server such as assigning separate IP addresses before connecting the video
server's to the network.
1
2
3
4
5
6
7
Click the [NETWORK] menu select button.
The NETWORK SET screen will be displayed,
and the default settings for each item will be
displayed automatically.
Once you have completed making the settings,
click the [SET] button.
Note: Check with the network system
administrator or Internet Service Provider
if you need to change the IP address 1,
subnet mask 2 or gateway 3 settings.
4
Set the password.
There are three access levels available (User,
Operator and Administrator) and separate
passwords can be set for each level. The factory
default settings are shown in Table 1 (p. 21),
and the range of operations varies as indicated
for each access level.
Note: It is recommended that you change the
passwords whenever possible for security
purposes. (p. 19)
5
NETWORK SPEED
This sets the speed of data transmission by the
video server.
Available settings:
64, 128, 256, 512, 1024 (Kbps), NO LIMIT
(Default setting: No limit for transmission speed)
6
HTTP PORT NUMBER
(default setting: 80)
This setting is used when more than one video
server is connected to a broadband router and a
single IP address for that router is being used to
make the images being monitored by the video
server publicly available over the Internet. Refer
to the documentation provided with the
broadband router for further details.
Normally the HTTP PORT NUMBER setting
should be left "80" without being changed, even
if more than one video server is connected to the
network.
– 18 –
Default settings displayed
Reset if necessary
English