Related Manuals for RCF ART 408-A MK II
Summary of Contents for RCF ART 408-A MK II
- Page 1 OWNER MANUAL ART 408-A MK II ART 410-A MK II ART 412-A MK II PROFESSIONAL ACTIVE ART 415-A MK II SPEAKER SYSTEMS ART 422-A MK II ART 425-A MK II...
- Page 2 (wall, ceiling, structure, etc.), and the components used for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must guarantee the security of the system / installation over time, also considering, for example, the mechanical vibrations normally generated by transducers.
- Page 3 RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of this product.
- Page 4 ART 322-A, the ART 310-A and the new digitally amplified ART 725-A. The RCF Team always has the performer’s needs at the forefront of the design in order to create new lines of speakers with renewed features, improved sound clarity and definition and even lighter weight systems.
- Page 5 REAR PANEL JACK/FEMALE XLR INPUTS (BAL/UNBAL). The system accept jack or XLR input connectors. These balanced inputs can be used to connect balanced or unbalanced microphones or audio sources at line level. The balanced connector is connected in parallel and can be used to send the audio signal to other amplified speakers, recorders or supplementary amplifiers.
- Page 6 On the back panel you will find all the controls, the signal and current inputs. In case is necessary to change the voltage please call your vendor or authorized RCF SERVICE THE SPEAKER CENTRE. This operation require the substitution of the fuse value and is reserved to an RCF SERVICE CENTRE. BEFORE TURNING ON...
Need help?
Do you have a question about the ART 408-A MK II and is the answer not in the manual?
Questions and answers