- Consult the dealer or an experienced radio/TV technician for help. Modifications: Any modifications made to this device that are not approved by RCF may void the authority granted to the user by the FCC to operate this equipment.
310-A and the new digitally amplified ART 525-A. The RCF Team always has the performer’s needs at the forefront of the design in order to create new lines of speakers with renewed features, improved sound clarity and definition and even lighter weight systems.
REAR PANEL FEATURES AND CONTROLS JACK/FEMALE XLR INPUTS (BAL/UNBAL) The system accept jack or XLR input connectors. LIMITER LED The amplifier has a built in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers. When the soft clipping circuit is active the LED blinks orange.
Page 6
WARNING: To use this product with the subwoofer pole-mount, before installing the system, please verify the allowed configurations and the indications regarding the accessories, on the RCF website to avoid any danger and damages to people, animals and objects. In any case, please assure the subwoofer which is holding the speaker is located on an horizontal floor and without inclinations.
Verificare inoltre l’idoneità del supporto (parete, soffitto, struttura ecc., al quale è ancorato il prodotto) e dei componenti utilizzati per il fissaggio (tasselli, viti, staffe non fornite da RCF ecc.) che devono garantire la sicurezza dell’impianto / installazione nel tempo, anche considerando, ad esempio, vibrazioni meccaniche normalmente generate da un trasduttore.
RCF SI PRENDE CURA DEL TUO SUONO RCF già nel 1996, con la prima introduzione della serie ART, si è posta come azienda leader nella tecnologia delle casse acustiche attive: un range di diffusori capaci di produrre un suono perfetto e potente con un cabinet leggero e capace di sopportare l’uso di ogni giorno.
Page 9
CARATTERISTICHE E CONTROLLI DEL PANNELLO POSTERIORE INGRESSO JACK/XLR (SBILANCIATO/BILANCIATO) Il sistema accetta connettori di ingresso Jack o XLR. LED DI INSERIMANTO DEL LIMITER L’amplificatore è dotato di un circuito di limiter in modo da prevenire il clipping dell’amplificatore o di sovraccaricare gli altoparlanti. Quando il circuito di soft clipping è...
Page 10
AVVERTENZA: Nell’utilizzo del prodotto con il supporto per il subwoofer (pole-mount), al fine di evitare pericoli di ribaltamento e di danni a persone, animali e cose, prima di procedere all’installazione del sistema, verificare sul sito RCF le configurazioni ammesse e le indicazioni e prescrizioni relative agli accessori a corredo degli stessi.