Hdmi Monitor Output Function - Toshiba Satellite A350 Series User Manual

Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Problem
Cannot access
Wireless LAN
Bluetooth
For further information on Bluetooth wireless communication, please refer
to Chapter 4,
Problem
Cannot access
Bluetooth device

HDMI monitor output function

Problem
No display
If you turn the computer off into Sleep Mode while the display is on TV, the
computer will select either the internal LCD or an external computer CRT
as the display device the next time is switched on.
User's Manual
Operating Basics.
Procedure
Make sure the computer's wireless
communication switch is set to on.
Operating Basics.
Procedure
Check to ensure the computer's wireless
communication switch is set to on.
Check to ensure the Bluetooth Manager
application is running on the computer and that
power to the external Bluetooth device is turned
on.
Check to ensure that no optional Bluetooth
Adaptor is installed in the computer - the built-in
Bluetooth hardware cannot operate
simultaneously with another Bluetooth controller.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
Try adjusting the contrast and brightness controls
on the television.
Press the FN + F5 hot key in order to change the
display priority and ensure that it is not set for the
internal display panel only.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Troubleshooting
9-23