Type of battery that can be used for the Remote Controller
When the batteries shipped with the Remote Controller are discharged,
replace them with commercially available CR2016 Lithium batteries. Other
types or battery should not be used.
Slim size remote controller
Installing the battery
1. Open the battery cover on the back side of the remote controller.
2. Be sure to place the battery with correct polarities. Press the battery
down to the stopper then push it forward to fit into the battery case.
3. Close the battery cover. Close the cover securely until it clicks.
Replacing the battery
1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.
User's Manual
Battery cover
Figure 2-12 Opening the battery cover
Stopper
Figure 2-13 Inserting the battery
Battery cover
Figure 2-14 Closing the battery cover
The Grand Tour
Battery
2-20