Checking Network Status - HIKVISION DS-7100HWI User Manual

User Manual of DS-7100HWI/HVI-SL Series DVR

8.4.3 Checking Network Status

Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
Click Status on the right bottom of the page.
If the network is normal the following message box pops out.
If the message box pops out with other information instead of this one, you can click Network button to show
the quick setting interface of the network parameters.
Figure 8.30 Checking Network Status
Figure 8.31 Network Status Checking Result
105